Gira Keyless In fingerprint reader pure white glossy Features: Installation in a device box. Stand-alone device or in combination with the Gira door communication system. In stand-alone operation, use of the integrated potential-free relay contacts for switching operations, e.g. for door openers with their own power supply (e.g. commercially available bell transformer). Commissioning through direct configuration without a PC or programming software. Inputs and outputs: Switching contact: Two relays with potential-free changeover contacts, load capacity AC DC 24 V 1.6 A. Two connections for power supply. Fingerprint module as a professional biometric access control system based on the new generation of area scanning technology. Scanning of the lowest layer of skin using high frequency. High recognition rate and protection against manipulation. Evaluation of the unique characteristics of the living human finger. Live recognition of the finger. Up to 99 fingers can be managed by the fingerprint reader unit. Reliable recognition of fingers that have been slightly injured, for example, while gardening (only the top layer of skin has been injured). Data protection through encryption processes. Fast reaction time from placing the finger on the finger to release: up to 30 stored fingers approx. 1 s, up to 99 stored fingers approx. 3 s. Night design of the fingerprint surface for orientation using white LED lighting. 360° placement of the finger possible. 3-color LED status display for optical signaling during programming and operation. Master PIN number on the enclosed sealed security card if the administrator finger is no longer available. The device can be reset at the factory using the enclosed security card. Acknowledgement buzzer for acoustic signaling for the user or installer. Acoustic warning tone when the fingerprint attachment is removed without authorization to detect sabotage. Sabotage circuit with switching actuator in the door communication system. Different fingers can be assigned to the two integrated changeover relays, e.g. thumb: controlling the door opening, index finger: switching the outside light. Inputs and outputs: Plug strip connection cable for Gira door communication system. Notes: The TKS-IP gateway can be used to connect the Keyless In devices to the Gira HomeServer. This enables intelligent links. For example, temporary or one-time access authorizations can be granted very easily. All data, including access authorizations, can then be managed centrally and flexibly via the Gira HomeServer. Children's fingers can generally only be reliably recognized from the age of 6. When integrating into the stainless steel Series 20 21 switch range, the 55 x 55 mm adapter frame is required. Integration into the Profile 55 is possible.
