eNet radio wall transmitter 3-way system 55, rockers with label field, clear, pure white, glossy Features: The eNet radio transmitters transmit switching, dimming and blind movement commands to corresponding eNet radio receivers. Easy expansion of existing switch combinations. Installation can be carried out without a surface-mounted housing or device box. The radio wall transmitter can be attached to walls using screws or glued to smooth or transparent surfaces using a mounting plate. Transmission of switching, dimming, blind movement and scene commands. Switching function, optimized for controlling touch actuators. Rocker can be set as a channel or scene function. 2-color LED to the right and left of the buttons for signaling. Battery-operated device. Can be set with eNet Server:: Fully encrypted radio transmission (AES-CCM) from eNet Server Software Version 2.0. Signaling of the transmission status can be switched off. Operating locks. Scenes All-On or All-Off, threshold scenes and individual scenes can be configured. Configuration of scene button via eNet SMART HOME app (if-then rules) to trigger actions, scenes, timers. Update of the device software. Localization of the device. Notes: Batteries are consumables and must be replaced regularly. Please observe the regulations for the disposal of used batteries. The radio wall transmitter is supplied with a program-neutral commissioning rocker switch. The matching rocker set for the switch range must be ordered separately. When using rocker sets made of metal and/or cover frames made of metal, the range may be reduced.
