Heating heat pump for indoor installation with integrated heat pump manager WPM Econ5 with touch display and 170 l hot water tank. Variable connection options for the brine and heating connections on the rear wall of the housing. Sound-optimized thanks to encapsulated compressor chamber and freely swinging compressor base plate. Removable heat pump module for easy installation of the heat pump in the building. High coefficient of performance (COP) through electronic control of the volume flows and optimized heat transfer due to asymmetrically shaped heat exchangers. Compact design with hot water preparation and integrated components for the direct connection of an unmixed heating circuit (cannot be used for bivalent systems): Built-in pipe heating (2 / 4 / 6 kW) can be used for hot water reheating up to 60 °C and as a reserve for heating operation High-efficiency heating circulation pump (note free pressure) Hot water charging pump Overflow valve for regulating the volume flow in the heating circuit Use of load-variable tariffs (SG Ready) Integrated heat meter for heating/hot water Electronically controlled brine circulation pump (note free pressure) and heat meter for heating/hot water preparation integrated. Soft starter (from SIW 8), flow and return sensors integrated Outside sensor (standard NTC-2) and dirt trap for brine circuit included in delivery. Heat pump structured white (similar to RAL 9003). Brine circuit distributor must be ordered separately. Expansion vessel and safety assembly for brine and heating circuit must be ordered separately.
