Heating heat pump system with integrated heat pump manager WPM Econ5 with touch display, consisting of Hydro-Tower HWK 332 and externally installed air/water heat pump. Heat pump Simple hydraulic connection using the enclosed flexible connection set (VS 32-220) Particularly quiet thanks to sound-optimized housing and sound-decoupled compressor chamber High efficiency thanks to high-performance evaporator, EC fan and COP booster Integration of intelligent room temperature controllers (Smart RTC) enables a further increase in system efficiency Flexible expansion options thanks to 2 mixer outputs for bivalent operation and/or the control of mixed heating circuits Side panels and cover in anthracite gray structured (similar to RAL 7016), front panels in gray aluminum structured (similar to RAL 9007). Hydro-Tower Low installation effort thanks to space-optimized combination of buffer and hot water storage tank Simple commissioning thanks to integrated heat pump manager and optimally coordinated hydraulic components Drinking water storage tank with 300 l and buffer storage tank with 100 l capacity Demand-dependent heating support using switchable pipe heating (2/4/6 kW) The electrical connection between the control system to be installed in the building and the external unit is made via a shielded 2-core data cable (e.g. LiYY 2x0.6 mm² or JY(ST)Y..LG2x2x0.8mm2) not included in the scope of delivery. Integrated heating flange with 1.5 kW as standard to support hot water preparation. Free pressure heating circuit circulation pump 5 m with a heating water throughput of 1.5 m3/h. Energy efficiency index EEI 0.20.
