Catalog

Glen Dimplex 376740 UP 75-25PK DN 25 with coupling relay circulation pump

In stock
SKU: 325019
€343.61
Into a basketIn the basketGo

Overview

High-efficiency wet-running pump for use in the generator and consumer circuits of heating systems. For use as a consumer circuit pump, 4 constant speed levels (4, 5, 6, 7.5 m delivery head) can be set. In the generator circuit, control is possible using a PWM input signal. Delivery head max. 7.5 m with a throughput of 1.3 m3/h, volume flow max. 3.4 m3/h with a delivery head of 2.2 m. Temperature range of the pumped medium -2°C to +110°C, pitch 180 mm, connection voltage: 1/N/PE ~230 V, 50 Hz. Energy efficiency index EEI 0.20, PL 28 W (meets the requirements of the Ecodesign Directive 2020). Dimensions W x H x D: 117 x 180 x 128 mm. Control and load cable including plug and coupling relay with base for top hat rail mounting included in delivery.

Property Value
Protection class (IP): IP44
Material of the blower wheel/impeller: other
Frequency: 50 Hz
Absorbed motor power (P1) per motor: 0.06 kW
Rated current: 0.58 A
Electrical connection: Connection cable with Plug
Insulation class according to IEC: F
Motor speed control: built-in
Type of speed control: continuously variable
Pump switching: other
Double pump: no
Installation length: 180 mm
Energy efficiency index (EEI): 0.2
Pump housing material: cast iron
Material quality of the pump housing: Cast iron GG 20 (GJL-200)
Material quality of the impeller/impeller: other
Max. volume flow: 7.5 m³/h
Max. delivery head: 7.5 m
Max. Working pressure: 10 bar
Cable length: 1.5 m
Rated voltage: 220 to 240 V
Number of phases: 1
Communication: built-in and prepared
Wireless standard Bluetooth: no
Wireless standard WLAN 802.11: no
Wireless standard 5G: no
Interface signal 0-10 V / 2-10 V: no
Interface signal 0-20 mA / 4-20 mA: no
Interface PT100 / PT1000 / PTC: no
Interface Pulse Width Modulation (PWM): yes
Interface Pulse counter: no
Potential-free switching contact: no
With communication interface RS-485: no
With communication interface RS-232: no
Supports protocol for EtherNet/IP: no
Supports protocol for KNX: no
Supports protocol for PROFIBUS: no
Supports protocol for PROFINET IO: no
Supports protocol for CAN/CANOpen: no
Supports protocol for Modbus TCP: no
Supports protocol for Modbus RTU: no
Supports protocol for BACnet MS/TP: no
Supports protocol for BACnet IP: no
Supports protocol for LON/LONWorks: no
Supports protocol for LIN bus: no
Medium temperature (continuous operation): 2 to 110 °C
Ambient temperature: 2 to 40 °C
Inlet side connection: External thread (metric)
Nominal diameter, inlet side connection: 1 1/2 inch (40)
Outlet side connection: External thread (metric)
Nominal diameter, outlet side connection: 1 1/2 inch (40)

Characteristics

Energy efficiency index (EEI)0.2
Supports protocol for KNXNo
HABUP 75-25PK DN 25 with coupling relay
ManufacturerGlen Dimplex
HAN376740
GTIN4015627376748
Number of phases1
Rated voltage220 to 240 V
Installation length180 mm
Frequency50Hz
Cable length1.5m
Rated current0.58A
IP protection)IP44
Ambient temperature2 to 40 °C
Supports protocol for EtherNet/IPNo
Supports protocol for PROFIBUSNo
Supports protocol for PROFINET IONo
Glen Dimplex 376740 UP 75-25PK DN 25 with coupling relay circulation pump
Glen Dimplex 376740 UP 75-25PK DN 25 with coupling relay circulation pump
€343.61
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart