TRMS power multimeter and PQ analyzer with 60,000 digits. The METRAHIT ENERGY is a digital multimeter with power and energy measurement, e.g. for recording the energy consumption during operation and in standby mode of entertainment, communication and information technology devices or household appliances (white goods, e.g. refrigerators) as well as a single-phase network analyzer (power quality) for testing the network quality and recording network disturbances. The METRAHIT ENERGY exceeds all performance limits of digital multimeters. Through simultaneous TRMS measurement of current and voltage, AC, AC+DC or DC, with 60,000 digits resolution, it precisely determines all important performance parameters. TRMS multimeter and data logger Simultaneous measurement of current and voltage and calculation of power and energy with active and reactive components. Power quality analysis: overvoltages/undervoltages, dips & swells, transients, harmonics analysis up to the 15th harmonic. Compact power and energy meter in a handheld multimeter. Measurement of the instantaneous power consumption and energy consumption over a longer period of time. Measurement of the energy balance in accordance with EU Directive 2005/32/EC or 2009/125/EC for brown and white goods, computers, etc. Analysis of faults in electrical consumers and energy generation systems. Evaluation with PC software. The METRAHIT ENERGY records the energy consumption of electrical appliances, white goods, e.g. refrigerators, and also modern devices in the entertainment industry such as smartphones, TVs or personal computers. It is important that it records both the instantaneous power consumption and the energy consumption with continuous measurement over a longer period of time. Power Quality (PQ) analysis, dips, swells, transients, overvoltages/undervoltages, harmonics up to the 15th harmonic. The real-time data memory for up to 300,000 measured values enables measurements to be taken as a data logger over an entire day. The METRAHIT ENERGY can be fully controlled remotely via the IR interface without user intervention. DAkkS calibration certificate included. 36-month guarantee on material and manufacturing defects. Scope of delivery: 1 x METRAHIT ENERGY system multimeter 1 x KS29 measuring cable set 2 x batteries 1.5V, type AA 1 x short operating instructions 1 x DAkkS calibration certificate 1 x protective rubber cover
| Property | Value |
| Max. Voltage measuring range AC: | 600 V |
| Measuring range selection: | manual/automatic |
| Display: | digital |
| With level measurement (dB): | yes |
| Frequency measurement: | yes |
| Capacitance measurement: | yes |
| Analog bar display: | no |
| Multiple display: | yes |
| Smallest Resolution for alternating voltage: | 0.01 mV |
| Max. voltage measuring range for DC: | 600 V |
| Smallest resolution for direct voltage: | 0.001 mV |
| Max. current measuring range for AC: | 10 A |
| Smallest resolution for alternating current: | 0.01 µA |
| Max. current measuring range for DC: | 10 A |
| Smallest resolution for direct current: | 0.01 µA |
| Max. Resistance measuring range: | 60 MOhm |
| Lowest resistance resolution: | 0.01 Ohm |
| Continuity test/diode test: | yes |
| Relative value measurement: | yes |
| Inductance measurement: | no |
| Conductance measurement: | yes |
| Instantaneous value memory (data hold): | yes |
| Maximum value memory: | yes |
| Minimal value memory: | yes |
| Peak value memory: | yes |
| True RMS measurement (TRMS): | yes |
| Duty cycle measurements: | yes |
| Measured value memory: | yes |
| Interface: | yes |
| Measuring circuit category: | CAT IV |
| Analog bar display analog/logarithmic: | no |
| Bluetooth interface: | no |
| Speed measurement: | no |
| Continuity test: | yes |
| Explosion-tested version: | no |
| IR interface: | yes |
| Cable length measurement: | yes |
| Smallest resolution frequency: | 0.01 Hz |
| Smallest resolution capacitance: | 0.00001 µF |
| Smallest temperature resolution: | 0.1 °C |
| Power and energy measurement: | yes |
| Line symmetry test for two-wire connections abE: | no |
| Max. frequency measuring range: | 1000 kHz |
| Max. capacitance measuring range: | 600 µF |
| Max. voltage measuring circuit category: | 300 V |
| Max. Temperature measuring range: | 1372 °C |
| Milliohm measurement with 4-wire technology (Kelvin connection): | no |
| Nominal test voltage 10 V: | no |
| Nominal test voltage 100 V: | no |
| Nominal test voltage 1000 V: | no |
| Nominal test voltage 250 V: | no |
| Nominal test voltage 50 V: | no |
| Nominal test voltage 500 V: | no |
| Harmonics analysis/Power Quality: | yes |
| Automatic circuit breaker: | no |
| Temperature measurement RTD: | yes |
| Temperature measurement TC: | yes |
