Gossen Metrawatt M555A METRISO PRIME 10 10kV test voltage insulation measuring device

High-precision insulation, low-resistance and voltage measuring device up to 40 T with 10 kV test voltage. The high-precision insulation measuring device METRISO PRIME 10 was developed to check insulation damage and to protect against electric shock in supply networks. It is used to measure insulation resistance up to 40 TOhm at a freely adjustable test voltage between 50 - 10,000 V. Other advantages are the automatic measuring range switching / capacity discharge, measurement of capacity and temperature, low-resistance and voltage measurement AC/DC 0 - 750 V. Measuring category CAT IV 600 V. Insulation measurement according to EN 61557-2 /0413-2Test voltages can be set in fixed steps: 50 V, 100 V, 250 V, 500 V, 1,000 V, 2,500 V, 5,000 V, 10,000 VMeasurement with gradually increasing voltageMeasurement range up to 40 T at a test voltage of 10 kV according to IEC 61557-2Measurement of polarization index PI and absorption ratio DARMeasurement with shielded measuring cable - GUARDProtection against live objectsVariable setting of limit valuesDigital filter for stabilizing the measured valuesCreation of R/I or R/U diagramsStorage of test resultsLow-resistance measurement in accordance with EN 61557-4 /0413- 4Continuity test of protective conductors and equipotential bonding connections with test current 200 mAThe right accessories for every application! COST SAVINGS - one device for many measuring tasks.TIME SAVINGS - through graphical representation of the measurement curves.EASY TO USE - through intuitive user guidance, graphic display and help functionFAST REPRODUCIBILITY - through modern data managementROBUST THANKS TO MEASURING CASE - use in harsh environments and easy transport.. The high-precision insulation measuring device METRISO PRIME 10 was developed to check insulation damage and to protect against electric shock in supply networks. It measures resistances up to 40 T at 10 kV test voltage in accordance with EN 61557-2. Absolutely precise measurement results are achieved even in the case of high-frequency interference. Faults can be located quickly and easily using the new burn function. Insulation measurements such as PI, DAR, DD, step test (SV), capacitance measurement, temperature measurement and the measurement of the continuity of the protective conductor are possible without any problems. 1x METRISO PRIME 10 1x test lead set consisting of: 11 kV cable, 3 m, (CAT IV 1000 V) with banana sockets, red 11 kV cable, 3 m, shielded, (CAT IV 1000 V) with banana sockets, black E cable 10 kV, 3 m, (CAT IV 1000 V) with banana sockets, blue3x crocodile clips 5.5 kV, 32 A (CAT IV 1000 V), black, red and blue 2x test probes 5.5 kV, 32 A with banana socket, red and black 1x temperature probe (Z555J) 1x USB cable 1x power cable 230 V 1x accessory bag 1x Operating instructions 1x calibration certificate 1x handling document for lithium-ion batteries 1x safety sheet measuring accessories