2-wire video transmitter for CAT5 cable For transmitting analog and AHD video signals over longer distances than is possible with coaxial cable. Two free wires in the network cable are sufficient. The symmetrical signal distribution and the built-in filtering guarantee maximum protection against signal interference. From the compact single-channel transmitter set to the 16-channel receiver unit, this series offers many combination options - depending on the application. Product features: Set of 2 1-channel passive video/voltage transmitters for cable type: 24 AWG, CAT5 / UTP cable (cable impedance: 100 Ohm, 20%, loop resistance DC 18 Ohm/100 m (length specifications 50 m) Transmission of the video signal and the power supply (12V DC) Analog/AHD up to approx. 250 m cable length (between VB 1092/301) Connections: BNC, RJ45, hollow plug/socket 2.1 mm Length degression: 150 mA=130m 250 mA=80 m, 350 mA=50 m, 500 mA=40 m Technical data: Impedance BNC: 75 Ohm impedance UTP: 100 OhmAmbient temperature: -10 °C to +45 °C Dimensions: 22 x 21 x 43 mm Weight: 0.035 kgInstallation instructions:Note:
