Switching/blind actuator 10/5-way KNX easy, 10A. Switching/blind actuator REG for switching an independent load per actuator channel or controlling a blind drive via two actuator channels each, any mixed operation of drive and switching functions. Modular device with integrated bus coupler, QuickConnect plug-in terminals for KNX bus connection, load/switching connections and labeling field. Operating button for manual operation for each output with status LED (single-surface operation), slide switch Auto/Manual and illuminated programming button. Functions: Control options for the switching channels for ON/OFF, timer function with switch-off warning and forced control with the respective status display. Automatic function can be activated/deactivated and load shedding possible by channel shutdown with the highest priority. 64 scene functions can be set per channel. Roller shutter/blind function in up/down operation with slat angle adjustment, positioning function and slat adjustment for blinds in percent parameterization. Status objects for the position of the slats in percent and the upper/lower end position. Forced control with status display and 3 alarm objects with different priority control. 64 scene functions per channel and adjustable sun protection function. Notes: The device can be programmed using the easy commissioning tool, easy configuration server or the ETS (from version 4). Please note the instructions of the roller shutter/blind motor manufacturer.
