Heating actuator 6-way KNX easy for 24/230V actuators, Triac. Heating actuator (REG) with 6 electronic outputs (Triac) for silent control of electrothermal actuators for heating systems or cooling ceilings. Consists of a series-mounted device with integrated bus coupler, bus connection via KNX connection terminal, slide switch auto/manual, 6 manual buttons for open/close per actuator channel with status LED (default, short circuit, overload), programming button with integrated LED, labeling field and screw terminals for input and output voltages. Functions: Output voltage for compatible valves 230 V AC or 24 V AC, manual operation via slide switch of the channel with 0% - 50% - 100%, summer/winter operation, setpoints for normal, forced or emergency operation. Cyclic monitoring/detection of the input signals from thermostats (monitoring time approx. 45 min). If the thermostat is defective, the triac output is set to emergency mode. Note: The device can be programmed using the easy commissioning tool, easy configuration server or the ETS (from version 5). Actuators with the same operating voltage must be connected to all actuator channels. Observe the installation instructions for heating system/actuator manufacturers.
