Switching actuator 1-way, 10A / 230V~, UP, KNX. Flush-mounted switching actuator with integrated bus coupler for switching circuits with a potential-free normally open contact. To control lighting circuits, you can choose between ON/OFF, timer, safety off, forced control, lock, logic, preset, delay function or 64 scenes. With switching function for time or continuous function. The device converts the bus information into corresponding commands. The output is switched via the system cable from the inputs assigned to it. Manual operation, as well as a switching status display using LEDs and an operating hour counter per output. The device can be read out using a diagnostic tool. With programming button and red programming LED, bus connection prefabricated with cable and bus terminal.
