Multimedia Volta hollow wall distributor, 3-row, with slotted plastic door. Small hollow wall installation distributor made of plastic, in accordance with DIN60670-24 and DIN 43871, suitable for use in residential buildings in accordance with DIN 18015 and for the installation of protectively insulated VDI components. Protection class IP30, protection class II protectively insulated. Consisting of: Plastic wall box with standard cable clamp and break-out cable entry slide with snap fastening, integrated spirit level. Hollow wall fastening with quick-release lever, can be mounted on the side or top/bottom. Rotatable cover frame with ventilation door made of sheet steel with slotted plastic insert for a better WLAN signal, powder-coated and baked, with 15 mm plaster compensation. Ventilation door, flush with the front with internal manually operated hinges. Door lock with flush handle recess and automatically folding back handle. Door hinge on the right or left without removing the cover frame. Upper connection compartment: Patch panel and DIN top hat rail snapped on insulated to accommodate different communication modules, there are 2 screw fastenings on the patch panel for the required functional equipotential bonding in accordance with DIN EN 50310 (VDE 0800-2-310). Labeling option with enclosed labeling strip for port labeling. Pre-assembled perforated mounting plates made of galvanized sheet steel with 3.2 mm holes are installed. A universal retaining bracket can be hung directly on the perforated sheet for screwless fastening of VDI components. A 3-way protective contact socket (can be rotated 90°) is installed in the lower connection compartment. The sockets can be connected directly via a connection terminal. The sockets can be fitted with an enclosed protective contact cover to comply with protection class II. The 3-way protective contact socket can also be mounted in two positions on a DIN top hat rail. Note: A surge protection module type 3 can be connected directly (not
