Hybrid Volta, hollow wall, 24PLE, 2 mounting plates, with socket and plastic door, small installation distributor for hollow wall installation made of plastic, tested according to DIN60670-24 and DIN 43 871. Rated voltage 400V/50 Hz. Protection class IP30, consisting of plastic wall box with standard cable clamp and break-out cable entry slide with snap fastening and integrated spirit level. Hollow wall fastening with quick-fixing lever, can be mounted on the side or top / bottom. Cover frame made of sheet steel, powder-coated and baked. 15 mm plaster compensation possible. Ventilation door with non-transparent plastic plate for better propagation of the WLAN signal compared to a sheet metal door. Ventilation slots at the bottom and top in the plastic plate to better dissipate the waste heat. Protection class IP30, white RAL9010, flush with internal, manually operated hinges. Door lock with flush-mounted recessed grip and automatically folding back handle. Door hinge on the right or left without dismantling the frame. 2-row device carrier made of galvanized sheet steel. 2-row, plastic device cover for 24 (28) modules with 46 mm device slot, quick-release fastening with 90° rotation on the cable entry slide and on the partition, sealable on both sides as standard. Finger-safe PE/N terminal with plug-in technology in assembly-friendly snap technology. A partition is installed to safely separate the multimedia part and the circuit distribution, which at the same time also allows for the accommodation of up to two sockets. Generous installation space with pre-assembled mounting plate(s) made of galvanized sheet steel with 3.2 mm regular holes in accordance with DIN 24041. Device holders for screwless fastening of devices for direct mounting on the perforated sheet by hanging or screwing are included. Cable management clips can be installed in the quick fasteners provided on the left and right.
