Empty cabinet, universZ, 1100x550x160mm, protection class II, IP44, 168 space units. - Wall-mounted cabinet or built-in cabinet with VDE mark (production monitoring) according to DIN0603-1 / DIN VV 0603-102 - Dimensional standard according to DIN 43 870 - for surface-mounted or flush-mounted installation or partially recessed installation - for setting up a meter panel system up to 355 A, AC 230/400 V /50 Hz - Protection class IP44, IP54, DIN0470-1 - Protection class II - Protection class IP3X behind the door - Air and creepage distances according to DIN0603-1 - Consisting of cabinet with door, from 800 mm width with two doors - Body and doors made of powder-coated, baked, stable profiled 1 mm thick sheet steel, inner lining made of insulating material - 2-component cable entries that can be removed without tools at the top and bottom - Back with pre-punched holes in the plastic part for installing 2-component cable entries - integrated on the side removable busbar bushings with pre-punched holes for cable entries - door flush with the front with adjustable hinges on the inside, can be hinged on the right or left, opening angle = 110° - door lock with sash and rod lock as three-point lock - door lock interchangeable, can be replaced by other locks - cabinets can be mounted next to each other and one above the other - cabinets can be connected next to each other and one above the other mechanically and electrically
