The bidirectional Easyclick adapter plug receiver not only receives the radio signals, but also sends back its status every time the status changes. Real switching states ON/OFF can be visualized on the handheld transmitter D 450 FU-HS 128, for example. An integrated energy measurement (energy measurement chip) also makes it possible to record the energy values of the connected consumer. The Easyclick receiver is used to switch lighting and other electrical consumers. Various functions and parameters can be selected: - Two-button operation ON/OFF (standard function) - One-button operation ON/OFF (toggle) - Button operation (pulse) - Hotel card switch with selectable run-on time - Stairwell light with selectable running time and switch-off warning - automatically OFF after selectable running time - Fan function with delayed ON and with selectable run-on time - Save and call up 4 lighting scenes at the touch of a button (one lighting scene per button) - Window handle and window contact, visualization also parallel to the switching outputs - Motion detector and light sensor - An individual function can be defined for each of the max. 32 taught-in transmitters - With manual ON/OFF button - Independently of the set functions, integrated repeater functions (1-level/2-level) can be switched on depending on the project. - When teaching in e.g. B. Window contacts, window handles and motion detectors are already assigned to the corresponding function/parameter.Technical data: Own consumption standby: < 0.5 W (bistable relay) Transmission frequency: 868.3 MHz Power supply: 100-240 V~/50-60 Hz Neutral conductor: required Ambient temperature: +10°C to +40 °C Storage temperature: -20 °C to +85 °C Housing dimensions: 136 x 65 x 39 mm Protection class: IP 20 Approvals: KEMA/KEUR Load types 230 V~ (110 V~) incandescent lamps 2500 W (1250 W) HV halogen lamps
