The bidirectional Easyclick JR receiver not only receives the radio signals, but also sends back its status every time the status changes. The Easyclick receiver is used to control roller shutters and blinds. Various functions and parameters can be selected: - Two-button operation UP/STOP/DOWN with slat adjustment (standard blind function) - Two-button operation UP/STOP/DOWN without slat adjustment (standard roller shutter function) - Inching mode (button follower) - One-button operation UP/STOP/DOWN - Locking for safety during maintenance work - Automatic ON/OFF - Sun sensor/twilight sensor/wind sensor/rain sensor - 4 position situations UP/DOWN for light scenes - Lockout protection with window contact/window handle - An individual function can be defined for each of the max. 32 transmitters that have been programmed. - Independently of the set functions, integrated repeater functions (1-level/2-level) can be switched on depending on the project. - When teaching window contacts and window handles, for example, these are already assigned to the corresponding function/parameter. Technical data: Power consumption: < 0.5 W (bistable relay) Transmission frequency: 868.3 MHz Power supply: 100-240 V~/50-60 Hz Neutral conductor: required Ambient temperature: -20 °C to +40 °C Storage temperature: -40 °C to +85 °C Plug-in terminals: max. 1 x 1.5 mm Housing height: 28 mm Protection class: IP 20 Fastening tabs: for screw fastening in switch boxes Approvals: KEMA/KEUR Connection data: I max. 1.6 A Easyclickpro flush-mounted JR receiver bidirectional, 2-channel with position detection In addition to the bidirectional functions, the Easyclick receiver variant with position detection enables the recording and feedback of the running times of roller shutters and blinds.
