WLAN receiver with 7 inch touch screen (visible image diagonal 17.6cm) and 5V power supply, for max. 4 cameras with single image or quad display. Suitable for the following cameras with native WLAN protocol: WR120B4, WR120B8, WR120SN, WR100B, WR100D. The receiver can be used to automatically start recordings when software motion is detected (pixel change in detection areas and/or recognition of human forms) and to record video and, if necessary, sound (with 2 second pre-alarm recording) on a microSDHC/microSDXC card (max. 128GB, UHS-II, U2, A1, V6, not included) in up to 3MP resolution (screen resolution: 1024 x 600 pixels) (ring buffer).o. Video compression optimizes bandwidth and storage requirements. The microphone and loudspeaker integrated in the receiver enable two-way communication via cameras with audio function. If the receiver is connected to the home router via WLAN, it is possible to view live images and recordings and to make two-way communication (via cameras with audio function) via WLAN or the Internet from a smartphone or tablet. Plug-and-play setup for app/PC software access without a fixed public IP address or DynDNS. App for iOS (App Store) and Android (Play Store, Google version) available free of charge (not part of the product, no promise of a service level). Automatic push notification can be set when motion is detected. App access from up to 3 smartphones/tablets at the same time. Browser access not possible. Receiver can be set up or hung on the wall. USB connection for backup on USB stick or operation via optional mouse. Optional batteries enable portable use of the receiver for up to 3 hours. Dimensions: 191 x 123 x 31mm. Suitable accessories: WLAN cameras WR120B4/B8, WR120SN, WR100B/D, WLAN repeater WR100E/EW, BATTERY WR100M7 (2 required), SD CARD 64GB, SD CARD 128GB, DC extension cable VKD-6M.
