in energy chains or mobile machine parts, use in measuring, control and regulation circuits, outdoors not without UV protection and only in compliance with the temperature range, conveyor and assembly lines, production lines, in machines of all kinds, in damp and wet rooms, tried and tested, cost-effective variant, low particle emissions in moving chain use, extra-fine strand made of bare copper wires (class 6), core insulation: PVC, cores twisted in layers with short lay lengths, fleece wrapping, PVC sheath, grey (RAL 7001), clean room classification for individual items on request, when used in energy chains: please observe assembly guidelines appendix T3, core based on 0245/0285, sheath based on 0245/0285, low-adhesion surface, flame-retardant in accordance with IEC 60332-1-2, designed for 5 million alternating bending cycles and travel distances of up to 10 meters,
| Property | Value |
| Number of cores: | 4 |
| Conductor nominal cross-section: | 1 mm² |
| Sheath color: | gray |
| Outer diameter approx.: | 7.3 mm |
| Conductor class: | Cl.6 = extra fine wire |
| Stranding element: | no |
| Material of the core insulation: | Polyvinyl chloride (PVC) |
| Core marking: | Numbers |
| Protective conductor: | yes |
| Shield over stranding element: | without |
| Shield over stranding: | without |
| Support element: | without |
| Sheath material: | Polyvinyl chloride (PVC) |
| Torsion protection: | no |
| Halogen-free according to EN 60754-1/2: | no |
| Flame-retardant: | according to EN 60332-1-2 |
| Low-smoke according to EN 61034-2: | no |
| Cold-resistant according to EN 60811-504+505+506: | yes |
| Oil-resistant according to EN 60811-404: | no |
| Perm. External cable temperature during assembly/handling: | 0 to 70 °C |
| Perm. Cable external temperature after installation without vibration: | -40 to 80 °C |
| Nominal voltage U0: | 300 V |
| Nominal voltage U: | 500 V |
| AWG size: | 18 |
| Conductor nominal cross-section (AWG): | 18 kcmil |
| Specification of core insulation: | other |
| Specification of sheath material: | other |
| Fire behavior class according to EN 13501-6: | without |
| Smoke development class according to EN 13501-6: | without |
| Drip behavior class according to EN 13501-6: | without |
| Acid development class according to EN 13501-6: | without |
| Shape: | round |
| Min. permissible bending radius, flexible use with forced guidance: | 54.75 mm |
| Min. permissible bending radius, stationary use/fixed installation: | 29.2 mm |
