Catalog

Lapp 1119218/500 ÖLFLEX CLASSIC 110 18G1 TR500m PVC control cable protective conductor Eca sold by the meter

In stock
SKU: 800728
€3.68
Into a basketIn the basketGo

Overview

Fixed installation as well as occasional flexible use without tensile stress with free, not constantly recurring movement, dry or damp rooms, with normal mechanical stress, suitable for torsion applications that are typical in the loop of wind turbines, in energy chains for travel distances of up to 5 m and 0.2 ... 1 million bending cycles, for the following dimensions: 0.5 to 2.5 mm² and 2 to 7 cores, large selection of standardized lengths and individual cuts, very wide range of articles, versions with up to 100 cores, fine-wire stranded wire made of bare copper wires, PVC core insulation LAPP P8/1, cores twisted in layers, sheath: PVC, gray (similar to RAL 7001), reg. no. 7030 for the following dimensions: up to 2.5 mm²: 2 - 65 cores from 4 mm²: 2 - 7 cores from 25 mm²: 2 - 5 cores, flame-retardant according to IEC 60332-1-2, good chemical resistance, oil-resistant according to DIN EN 50290-2-22 (TM54),

Property Value
Core number: 18
Conductor nominal cross-section: 1 mm²
Sheath color: gray
Outer diameter approx.: 12.7 mm
Conductor class: Class 5 = fine-wire
Stranding element: no
Material of the core insulation: Polyvinyl chloride (PVC)
Core identification: Numbers
Protective conductor: yes
Shield over stranding element: without
Shield over stranding: without
Support element: without
Sheath material: Polyvinylchlorid (PVC)
Torsionsschutz: nein
Halogenfrei nach EN 60754-1/2: nein
Flammwidrig: nach EN 60332-1-2
Raucharm nach EN 61034-2: no
Cold-resistant according to EN 60811-504+505+506: yes
Oil-resistant according to EN 60811-404: no
Perm. External cable temperature during assembly/handling: -15 to 70 °C
Perm. External cable temperature after installation without vibration: -40 to 80 °C
Nominal voltage U0: 300 V
Nominal voltage U: 500 V
Shape: round
Min. permissible bending radius, flexible use with forced guidance: 190.5 mm
Min. permissible bending radius, flexible use/free movement: 127 mm
Min. permissible bending radius, stationary use/fixed installation: 50.8 mm

Characteristics

Sheath materialPolyvinyl chloride (PVC)
Outer diameter approx.12.7 mm
Oil-resistant according to EN 60811-404No
Conductor nominal cross section1 mm²
HABÖLFLEX CLASSIC 110 18G1 TR500m
ManufacturerLapp
HAN1119218/500
GTIN4044774551807
Wire number18
ShapeAround
Leader ClassKl.5 = fine-stranded
Coat colorGray
Lapp 1119218/500 ÖLFLEX CLASSIC 110 18G1 TR500m PVC control cable protective conductor Eca sold by the meter
Lapp 1119218/500 ÖLFLEX CLASSIC 110 18G1 TR500m PVC control cable protective conductor Eca sold by the meter
€3.68
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart