PROFIBUS DP (according to DIN 19245 and EN 50170, e.g. for SIEMENS SIMATIC® NET, also for FIP Factory Instrumentation Protocol)., suitable for torsion applications that are typical in the loop of wind turbines (WKA), cables can be used for PROFIBUS-DP, PROFIBUS-FMS as well as FIP, used wherever the combination of outer jacket with properties similar to polyurethane, halogen-free and increased flame retardancy is required, for highly flexible applications (drag chains, frequently moving machine parts), foam skin - wire insulation (O2YS), bare copper strand, overall shielding with copper braid and plastic-coated aluminum foil, shielding braid made of tinned copper wires, outer jacket: polyurethane (PUR) mixture, validation: UL/CSA type CMX according to UL 444 and CSA C22.2 No.214, flame retardant according to IEC 60332-1-2, halogen-free, For the bit rates listed, the following maximum cable length of a bus segment (cable type A, PROFIBUS-DP) results according to PNO specifications: 93.75 kbit/s = 1200 m 187.5 kbit/s = 1000 m 500 kbit/s = 400 m 1.5 Mbit/s = 200 m 12.0 Mbit/s = 100 m, Oil-resistant,
