Catalog

Lapp 4180414/100 Multi-Standard SC 1 1X0,5 DBU RG100m PVC single core cable

In stock
SKU: 838368
€0.41
Into a basketIn the basketGo

Overview

Internal wiring of devices, control cabinet wiring, factory wiring, use in the most important global markets possible, reduction of technical documentation effort, simplified warehousing, increased efficiency in production, fine-wire strands made of tinned copper wires, core insulation based on special PVC, multi-standard cables are designed in metric nominal cross-sections in mm² or AWG/kcmil nominal sizes. The leading cross-section is given in the table below, the corresponding cross-section of the other system is from catalog appendix table T16, type certifications: H05V-K according to EN 50525-2-31, UL AWM styles 1007 & 1569 (by UL according to UL standard UL 758, UL AWM file number of UI Lapp GmbH: E63634), CSA AWM IA/B (by CSA according to CSA standard CSA C22.2 No. 210-05, CSA class 5851-01), flame-retardant according to IEC 60332-1-2, flame-retardant according to UL VW1 / CSA FT1, oil-resistant,

Property Value
Number of cores: 1
Conductor nominal cross-section: 0.5 mm²
Core color: blue
Outer diameter approx.: 2.5 mm
Core marking: Color
Core insulation material: Polyvinyl chloride (PVC)
Sheath color: without
Sheath material: without
Protective conductor: no
Nominal voltage U0: 300 V
Nominal voltage U: 500 V
Conductor material: copper
Conductor class: Class 5 = finely stranded
Perm. max. conductor temperature: 70 °C
Shield: no
Drain wire: no
Protective cover: without
Reinforcement/armoring: without
Halogen-free according to EN 60754-1/2: no
Flame-retardant: according to EN 60332-1-2
Low smoke according to EN 61034-2: no
Cold-resistant according to EN 60811-504+505+506: yes
Oil-resistant according to EN 60811-404: no
Insulation integrity: no
Permissible external cable temperature during assembly/handling: 5 to 70 °C
Permissible Cable external temperature after installation without vibration: -40 to 70 °C
Conductor surface: tinned
AWG size: 22
Min. permissible bending radius, stationary use/permanently installed: 10 mm

Characteristics

Sheath materialWithout
Outer diameter approx.2.5 mm
Oil-resistant according to EN 60811-404No
Conductor nominal cross section0.5 mm²
Conductor materialCopper
HABMulti-Standard SC 1 1X0,5 DBU RG100m
Minimal order100 meters
ManufacturerLapp
HAN4180414/100
GTIN4044774698441
AWG Size22
Wire number1
Leader ClassKl.5 = fine-stranded
Coat colorWithout
Lapp 4180414/100 Multi-Standard SC 1 1X0,5 DBU RG100m PVC single core cable
Lapp 4180414/100 Multi-Standard SC 1 1X0,5 DBU RG100m PVC single core cable
€0.41
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart