Catalog

Lapp 4521001 H07V-K 1X25 GNYE cut PVC single core cable without protective conductor

In stock
SKU: 802438
€4.06
Into a basketIn the basketGo

Overview

Laying in pipes on, in and under plaster as well as in closed installation ducts. For direct laying on platforms, gutters and trays only as a potential equalization cable. The marking on cables and lines also stands for international recognition of test marks/certificates from national validation institutes, e.g. in the form of . The marking is for goods traffic between European countries, Fine-wire copper conductor made of bare copper wires according to stranded conductor class 5 according to IEC 60228/0295, PVC-based core insulation, No type-certified core insulation colors according to EN 50525-1/0285-525-1: transparent, green (single color), yellow (single color), all double colors (except green-yellow and yellow-green), -Type certification according to EN 50525-2-31/0285-525-2-31, Flame-retardant according to IEC 60332-1-2, Coil: d1=18mm, d2=200mm, b=85mm,

Property Value
Number of cores: 1
Conductor nominal cross-section: 25 mm²
Outer diameter approx.: 10.2 mm
Core marking: Color
Core insulation material: Polyvinyl chloride (PVC)
Sheath color: without
Sheath material: without
Protective conductor: yes
Nominal voltage U0: 450 V
Nominal voltage U: 750 V
Conductor material: Copper
Conductor class: Class 5 = finely stranded
Perm. max. conductor temperature: 70 °C
Shield: no
Drain wire: no
Protective cover: without
Reinforcement/armoring: without
Halogen-free according to EN 60754-1/2: no
Flame-retardant: according to EN 60332-1-2
Low smoke according to EN 61034-2: no
Cold-resistant according to EN 60811-504+505+506: yes
Oil-resistant according to EN 60811-404: no
Insulation integrity: no
Permissible external cable temperature during assembly/handling: 5 to 70 °C
Permissible Cable external temperature after installation without vibration: -40 to 80 °C
Conductor surface: bare
AWG size: 4
Min. permissible bending radius, stationary use/permanently installed: 51 mm

Characteristics

Sheath materialWithout
Outer diameter approx.10.2 mm
Oil-resistant according to EN 60811-404No
Conductor nominal cross section25 mm²
Conductor materialCopper
HABH07V-K 1X25 GNYE cut
ManufacturerLapp
HAN4521001
GTIN4044773422498
AWG Size4
Wire number1
Leader ClassKl.5 = fine-stranded
Coat colorWithout
Lapp 4521001 H07V-K 1X25 GNYE cut PVC single core cable without protective conductor
Lapp 4521001 H07V-K 1X25 GNYE cut PVC single core cable without protective conductor
€4.06
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart