As control cables and machine supply cables, mechanical engineering, apparatus construction, high restoring forces and extension lengths up to 3 times the closed spiral length, durable in rough use due to resistant PUR sheath material, insensitive to contact with many mineral oil-based lubricants, diluted acids, aqueous alkaline solutions and other chemical media, fine-wire strand made of bare copper wires, core insulation made of special PVC P8/1, outer sheath made of special polyurethane, variants without obligatory LAPP naming, but with other block lengths, outlet lengths or outlet shapes on request, lengths of the straight ends: 1st end 200 mm, 2nd end 600 mm, use of talcum powder, core based on 0812/0285, sheath based on 0250/0285, resistant to microbes, hydrolysis and almost all mineral oils, high chemical resistance when exposed to of benzenes, petrol and other substances according to selection table T1 in the appendix, abrasion-resistant and notch-resistant,
| Property | Value |
| Conductor nominal cross-section: | 0.75 mm² |
| Outer diameter approx.: | 9.9 mm |
| Sheath colour: | grey |
| Number of cores: | 12 |
| Spiral length (closed): | 1000 mm |
| Spiral length (extended): | 3000 mm |
| Protective conductor: | yes |
| Conductor class: | Class 5 = fine-wire |
| Material of the core insulation: | Polyvinyl chloride (PVC) |
| Core marking: | Numbers |
| Sheath material: | Polyurethane (PUR) |
| Flame-retardant: | no |
| Perm. Cable external temperature during assembly/handling: | 5 to 50 °C |
| Nominal voltage U0: | 300 V |
| Nominal voltage U: | 500 V |
| AWG cross-section: | 20 |
