Legrand 662610 LED emergency light U21 100LM 3STD BD AAT IP42

LED standby lights certified according to IEC and EN 60598-2-22, with high-performance LEDs. Screw terminals 2 x 2.5 mm2, protection class IP 42 and impact resistance IK 04, nominal operating time 1 and 3 hours, Ni-Cd or Ni-MH battery, recharge time 24 hours, charge monitoring using a green LED, supply voltage: 230 V +/-10%, 50/60 Hz Class II, flush-mounted installation for ceiling and wall mounting with installation box (order no. 661720/061721) possible. Single battery light addressable with integrated self-test function. The result is displayed on the two signal LEDs (green = OK, yellow = DEFECTIVE). The lights can be operated either in permanent or standby mode. When using the monitoring center (order no. 062600), the light must be addressed. The lights are connected to the control center using a 2-pole bus cable (2 × 1.5 mm2). The lights are addressed using the programming remote control (order no. 062610). The visualization is done via the software (order no. 062602).