Maico 0084.0178 ER-APB 100 F surface-mounted fan

Version with light control: Barrier-free product, as automatic switching on/off is possible via the light control. The light control switches the fan on when the room reaches a minimum level of brightness, e.g. when a lamp is switched on. Switch-on brightness (on the device) min. 30 lux. Switch-off brightness (on the device) max. 0.3 lux. No need to install a switch. Switch-on delay approx. 50 sec. Run-on time approx. 6 min. Circuit variant: With an additional switch, the fan can be switched off independently of the room lighting (see circuit diagrams on the Internet). Not speed-controlled. Surface-mounted fan with ISO Coarse > 30% (G2) filter for ventilating kitchens, bathrooms or toilets. Metal exhaust nozzle DN 75/80 with maintenance-free metal shut-off flap and automatic triggering device to prevent fire spread K90-18017. Metal shut-off flap also serves as a cold smoke flap. Housing can be rotated, allowing the outlet nozzle to be connected to the main line at the top left or top right. Filter can be changed easily without tools. The fan can be installed quickly and easily in the housing using the snap-on fastening and the electrical plug connection. Colour: traffic white, similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 according to DIN0100-701, even with water jets. For details, see planning information. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with ball bearings closed on both sides. Volume flow characteristic curve and leakage air rate tested by TÜV Bayern eV Leakage air volume flow < 0.01 m3/h. Shaft level difference according to DIN 4109, tested by IAB Oberursel. With VDE mark.Article: ER-APB 100 F, design: light control, flow rate: 100 m3/h, speed: 1850 1/min, air direction: ventilation, speed controllable: no, SEC average: -21.24 kWh/(m2*a), rated voltage: 230 V, mains frequency: 50 Hz, power consumption: 29 W, IMax: 0.15 A, protection class: IP X5, mains cable: 3 / 1.5 mm2, installation location: wall / ceiling, installation type: surface-mounted, system type: decentralized, material: plastic, color: traffic white, similar to RAL 9016, weight: 2.1 kg, weight with packaging: 2.66 kg, filter class: ISO Coarse > 30 % (G2), fire protection: yes, shut-off device: integrated metal shut-off flap with release device, connection diameter: 75 mm / 80 mm, width: 236 mm, height: 236 mm, depth: 217.5 mm, width with packaging: 255 mm, height with packaging: 335 mm, depth with packaging: 255 mm, conveying medium temperature at IMax: 40 °C, run-on time: 6 min, switch-on delay: 50 s, sound pressure level: 49 dB(A) / specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2, approval number: Z-51.1-45, nominal width: 75 mm / 80 mm