Maico 0095.0242 final assembly set PP 45 RC

Final assembly sets for the PushPull 45 single room ventilation unit with fan, ceramic heat exchanger, inner cover and two integrated filters (G2 + G3), so that the air is filtered in both directions. Versions: PP 45 K - with electric flap. PP 45 O - with manual flap. PP 45 RC - with radio control and electric flap. To achieve efficient ventilation, we recommend operating the units in pairs. This is a basic requirement for the PP 45 RC final assembly set. Necessary accessories: shell sleeve PP 45 RHK or PP 45 RHL, outer cover PP 45 AK, PP 45 AE or PP 45 AW for external wall mounting or reveal element PP 45 LE for reveal duct mounting, room air control RLS 45 K or RLS 45 O for the final assembly sets PP 45 K and PP 45 O and radio switch DS 45 RC for the radio device PP 45 RC. Several devices (max. 6) can be controlled simultaneously using a room air control RLS 45 K or RLS 45 O. When using the radio switch DS 45 RC, the number of devices is not limited, provided the devices are within range of the radio switches. Optional accessories: Wall block PP 45 MB, power unit PP 45 LT, EnOcean extension module PP 45 EO, EnOcean actor PP 45 ACT, humidity sensor PP 45 HYI and PP 45 HY, CO2 sensor PP 45 CO2, VOC sensor PP 45 VOC, air filter, replacement PP 45 G2, PP 45 G3 and PP 45 G2P. The device versions PP 45 K and PP 45 RC have an electric flap. If the devices are switched off (level 0), the flap closes automatically. The device does not consume any electrical energy. With the final assembly set PP 45 O, the external flap is closed manually. The room air controls RLS 45 K and RLS 45 O can be expanded with the internal humidity sensor PP 45 HYI or with the external sensors PP45 HY, PP 45 CO2 and PP 45 VOC. The devices achieve energy efficiency class A+. The PP 45 RC final assembly set can be expanded with a PP45 HYI humidity sensor. The sensor is only installed in the master device. The RLS 45 K and RLS 45 O room air controls and the PP 45 RC radio devices with the DS 45 RC radio switch can be operated in 5 ventilation levels 15/20/30/36/42 m3/h and 3 operating programs continuous ventilation with heat recovery, cross ventilation and sensor-controlled automatic operation. In automatic mode, the delivery volume is continuously adjusted to the sensor value. With the RLS 45 O room air control, automatic operation is only possible with the connected sensor. The RLS 45 K room air control and the DS 45 RC radio switch can perform additional functions such as shock ventilation (time-limited intensive ventilation) and sleep function (time-limited shutdown). With the help of the RLS 45 K room air control, communication between extract air devices (e.g. ECA/ER) and PushPull devices is possible. This means that when an extract air fan starts up, the PushPull devices switch to supply air mode in order to compensate for the resulting negative pressure. Supply air mode is possible with a run-on time of 0, 6 or 15 minutes. The number of connected devices is also taken into account. The RLS 45 K room air control, in combination with the EnOcean extension module PP 45 EO, offers the unique option of connecting the wired PP 45 K and PP 45 O and the PP 45 RC radio devices. With this control combination, for example, wired devices can be installed on the ground floor and radio devices on the first floor. The entire system is controlled at the touch of a button. The RLS 45 K room air control also offers the option of conveniently configuring the devices on a PC/laptop (Windows) using commissioning software. Heat exchanger: With the high-performance heat exchanger and the highly efficient EC fan, the devices achieve a heat provision level of