Special features: With the DS 45 RC radio switch, 5 ventilation levels PP 45 - 15/20/30/36/42 m3/h and PPB 30 - 5/12/18/22/26 m3/h and 3 operating modes: continuous ventilation (with heat recovery), cross ventilation (without heat recovery) and sensor-controlled automatic operation can be selected. Continuous ventilation with heat recovery operating mode: PushPull operation. The devices run alternately and change direction every 60 s. Cross ventilation operating mode: One device is permanently in supply air mode and the corresponding device in extract air mode (e.g. for summer night cooling). Automatic operation is only possible with the optionally integrated PP 45 HYI humidity sensor in the RC device. Individual operation of the PP 45 RC and PPB 30 RC with the DS 45 RC radio switch is also possible. Time-limited intensive ventilation (shock ventilation) or time-limited shutdown (sleep function) can also be selected at the touch of a button. Any number of devices can be controlled via the DS 45 RC radio switch, provided they are within range. Can be used anywhere where a control cable cannot be installed. The radio switch does not require a battery. The radio switch can be screwed on or glued to glass surfaces. The radio switch is required as an accessory for the final assembly sets PP 45 RC and PPB 30 RC.Article: DS 45 RC, power cable: not necessary, installation location: wall, installation type: surface-mounted, material: plastic, color: pure white, similar to RAL 9010, weight: 0.056 kg, weight with packaging: 0.074 kg, width: 80 mm, height: 80 mm, depth: 15 mm, width with packaging: 90 mm, height with packaging: 90 mm, depth with packaging: 37 mm
