For connecting 8 conventional devices with AC 230 V outputs to KNX. With integrated bus coupler and plug-in screw terminals. The input voltage level is displayed for each input with a yellow LED. A green LED indicates that the device is ready for operation after the application has been loaded. For mounting on TH35 top hat rails in accordance with EN 60715. The bus is connected via a bus connection terminal; a data rail is not required. KNX software functions: Switching, dimming or blind control via 1 or 2 inputs. Blind control position values (8-bit). Edges with 1-, 2-, 4- or 8-bit telegrams. Differentiation between short and long actuation. Initialization telegram. Cyclic sending. Edges with 2-byte telegrams. 8-bit slider. Locking function. Normally closed/normally closed. Debounce time. Input voltage: AC 230V, 50-60Hz. Inputs: 8. Input current: AC approx. 7 mA. Cable length: max. 100 m. Device width: 4 HP = approx. 72 mm. Scope of delivery: With bus connection terminal and cable cover. Color: light gray.
