Catalog

MERTEN MEG2335-0319 Central plate polar white glossy

In stock
SKU: 162238
€66.09
Into a basketIn the basketGo

Overview

Integrated increased contact protection in accordance with 0620 Part 1 (child protection). For extending QuickFlex sockets. The surge protection module protects devices connected to the socket from voltage spikes in the network. The module also protects sockets that are within a radius of 5 m on the same circuit. With visual and acoustic fault indication: after an overvoltage, the green control LED goes out and a signal tone sounds when the plug is plugged in. Surge protection device (SPD) in accordance with EN61643-11 Type 3. Nominal voltage Un: AC 230 V. Maximum continuous voltage Uc: AC 255 V. Combined surge Uoc: 6 kV. Protection level Up (LN): < 1.5 kV. Protection level Up (L/N - PE): < 1.5 kV. Nominal leakage current In (8/20): 3 kA. Max. leakage current Imax (8/20): 6 kA. Response time (LN): < 25 ns. Response time (L/N-PE): < 100 ns. Mains-side overcurrent protection: 16 A. Permissible temperature range: -5 degrees C to +40 degrees C. Spare part:
Overvoltage protection module MEG2005-0004.

Material: Brilliant thermoplastic.

Color: polar white glossy.

Property Value
Version: SCHUKO
RAL number (similar): 9010.0
Number of units: 1.0
Color: white
Suitable for protection class (IP): IP20
Lockable: no
With increased Contact protection: yes
With hinged lid: no
Mounting type: Flush-mounted
Text field/labeling area: no
Ejection mechanism: no
Halogen-free: yes
Overvoltage protection: no
Residual current protection: no
Special power supply: without special power supply
Twisted central insert: no
With fine fuse: no
Fastening type: Claw/screw fastening
Material: Plastic
Material quality: Thermoplastic
Surface: untreated
Surface finish: glossy
Number of sockets switchable: 0.0
Device width: 55.0 mm
Device height: 55.0 mm
Device depth: 42.0 mm
Insulated installation: yes
With loop-through function: no
With on/off switch: no
With built-in USB power supply: no
With function lighting: no
With orientation lighting: no
Transparent: no
Protective contact: yes
Protective conductor contact round: no
Number of active contacts (round): 3.0
Number of active contacts (flat): 0.0
With signal lamp: yes
Number of phases: 1.0
Antibacterial treatment: no

Characteristics

Insert Module TypeLight switch covers
ColorWhite
ManufacturerMERTEN
HANMEG2335-0319
GTIN4042811146320
LockableNo
Antibacterial treatmentNo
Number of Units1.0
Number of phases1.0
Number of active contacts (approx.)3.0
VersionSCHUKO
Surface finishGlittering
Ejection mechanismNo
Mounting typeClaw/screw fastening
ColorWhite
Residual current protectionNo
Suitable for protection class (IP)IP20
Device width55.0 mm
Device height55.0 mm
Device depth42.0 mm
Halogen freeYes
Insulated installationYes
With loop-through functionNo
With on/off switchNo
With micro fuseNo
With functional lightingNo
With hinged lidNo
With orientation lightingNo
With signal lampYes
With built-in USB power supplyNo
With increased contact protectionYes
Mounting typeFlush-mounted
SurfaceUntreated
RAL number (similar)9010.0
Protective contactYes
Protective conductor contact roundNo
Special power supplyWithout special power supply
Text field/label areaNo
TransparentNo
Twisted central insertNo
MaterialPlastic
Material qualityThermoplastic
Overvoltage protectionNo
MERTEN MEG2335-0319 Central plate polar white glossy
MERTEN MEG2335-0319 Central plate polar white glossy
€66.09
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart