For ohmic, inductive or capacitive loads, e.g. dimmable LED lamps, incandescent lamps, dimmable wound transformers or electronic transformers. (Phase control or phase control). The universal dimmer module automatically detects the connected load. Do not connect mixed loads. The dimmer module is controlled with mechanical buttons in parallel operation. When installing the dimmer module in combination with a button, a deep (60 mm) installation box must be used. With screw terminals. Nominal voltage: AC 230 V, 50 Hz. Switching capacity: LED lamps: 4-100 VA (RC mode). 4-20 VA (RL-LED mode). Incandescent lamps: 5-200 W. Halogen lamps: 5-150 W (230 V). 5-200 VA (NV with dimmable wound transformer). 5-200 VA (low voltage with dimmable electronic transformer). Neutral conductor: not required. Connection terminals: screw terminals for max. 2.5 mm2. Fuse: 16 A circuit breaker. Dimensions: 45 x 40 x 21 (HxWxD). Properties: -short-circuit proof. -overload proof. -overheating proof. -soft start. -memory function. -automatic load detection. -min./max. limit adjustable. -operating mode RL-LED mode adjustable. Note: Information on dimming LED lamps is available on the Internet at Merten Dimmertest. http://www.merten.de/Dimmer-Test.dimmertest.0.html. Color: black.
