In the Design System M. Motion detector for indoor use with creep-by protection. When movement is detected, a data telegram defined by the programming is sent. With integrated bus coupler. For wall mounting in a 60 mm installation box, optimal use at 2.2 m. KNX software functions: Five motion blocks: Up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. Normal operation, master, slave, safety pause, lock function. Sensitivity, brightness and stairwell light time can be set via the ETS or the potentiometer. Two motion sensors: Sensitivity and range can be set separately for each sensor. Learnable stairwell light time. Detection angle: 180 degrees. Range: 8 m right/left, 12 m forwards (at a mounting height of 2.20 m). Mounting height: 2.2 m or 1.1 m with half the range. Number of levels: 6. Number of zones: 46. Number of motion sensors: 2, adjustable per sector. Sensitivity: continuously adjustable (ETS or potentiometer). Light sensor: continuously adjustable from approx. 10 to 2000 lux (ETS or potentiometer). Time: adjustable in steps from 1 s to 8 min (potentiometer) or adjustable from 1 s to 255 hours (ETS). EC directives: Low Voltage Directive 2006/95/EC and EMC Directive 2004/108/EC. Scope of delivery: With bus connection terminal and support plate. With cover segments to limit the detection area. Material: Thermoplastic, matt. Color: aluminum.
