MERTEN MEG5570-1019 Presence detector ARGUS presence slave polar white

For controlling all ARGUS presence devices (master) with Pluslink input. The device has four Pluslink outputs. For the control function via Pluslink, a separate wire is required in the installation for each Pluslink line to the receiving master devices. Presence detector for ceiling mounting indoors. The sensor module detects moving heat sources (e.g. people) in an adjustable detection area and starts a staircase lighting time. When movement is detected, the Argus presence slave sends this information to the Argus presence master(s). The master controls the lighting. The brightness is measured at the installation location of the master. For installation in a 60 mm flush-mounted box or in the surface-mounted housing available as an accessory. With claw and screw fastening. With screw terminals. Functions: -Global control via four Pluslink outputs. -Brightness-independent staircase lighting function. Nominal voltage: AC 220/230 V, 50/60 Hz. Outputs: 4 x Pluslink. Neutral conductor: required (3-conductor system). Connection cross-section: max. 2x2.5 mm2. Detection angle: 360 degrees. Number of levels: 6. Number of zones: 136. Number of motion sensors: 4. Recommended installation height: 2.5 m. Range: radius of max. 7 m (at an installation height of 2.50 m). Sensitivity: continuously adjustable.

Accessories:
Surface-mounted housing for ARGUS presence 550619.

Color: polar white.