The universal temperature controller insert with touch display can be used to regulate the room or floor temperature. It is operated via a touch display. Electric underfloor heating, radiators or actuators can be connected to the controller. The thermostat can be operated in three different modes: Room air mode. The internal temperature sensor detects the room temperature and regulates it. Floor mode. The floor sensor, available as an accessory, detects the floor temperature and regulates the electric underfloor heating. Dual mode. The internal temperature sensor detects the room temperature and regulates it. At the same time, the floor sensor monitors the floor temperature and limits it to the preset maximum temperature. This mode is particularly recommended for temperature-sensitive parquet or laminate floors. Nominal voltage: AC 230 V, 50 Hz. Nominal load (ohmic): 16 A. Nominal load (inductive): 1 A, cos Phi = 0.6. To be completed with: Central plate for universal temperature controller insert with touch display System M MEG5775-03../-04.., System Design MEG5775-60.., System Area MEG5775-40../-41.. Accessories: Remote sensor for universal room temperature controller with touch display MEG5775-0003.
