Catalog

MERTEN MEG5776-0000 Universal temperature controller insert with touch display

In stock
SKU: 159957
€164.91
Into a basketIn the basketGo

Overview

The programmable universal temperature controller insert with touch display can be used to regulate the room or floor temperature. It is operated via a touch display. Electric underfloor heating, radiators or actuators can be connected to the controller. The thermostat has a weekly clock with individually adjustable programs. Alternatively, you can choose between 3 pre-programmed programs. Various heating modes are available: Comfort mode, ECO mode and frost protection mode. The thermostat can be operated in four different operating modes: Room air mode. The internal temperature sensor records the room temperature and regulates it. Floor mode. The floor sensor, available as an accessory, records the floor temperature and regulates the electric underfloor heating. Dual mode. The internal temperature sensor records the room temperature and regulates it. At the same time, the floor sensor monitors the floor temperature and limits it to the preset maximum temperature. This operating mode is particularly recommended for temperature-sensitive parquet or laminate floors. PWM operation. The positive width modulation (PWM) switches the heating on and off at regular intervals. The desired temperature is set using the PWM value. The floor sensor is not functional in this operating mode. The room temperature limits are adhered to. Functions: -Automatic summer/winter time changeover. -Valve protection function. -Operating hours display. -Controller behavior: PWM or 2-point. -Relay output behavior: normally closed/normally closed. -Self-learning lead times. Rated voltage: AC 230 V, 50 Hz. Rated load (ohmic): 3680 W, 16 A. Rated load (inductive): 1 A, cos Phi = 0.6. Operating temperature: -10 degrees C to +35 degrees C. Setting range. Room temperature: + 5 degrees C to +35 degrees C. Floor temperature: + 5 degrees C to +50 degrees C.

To be completed with:
Central plate for universal temperature controller insert with touch display System M MEG5775-03../-04.., System Design MEG5775-60.., System Area MEG5775-40../-41..

Accessories:
Remote sensor for universal room temperature controller with touch display MEG5775-0003.

Property Value
Type of power supply: 230 V AC
Mounting type: Flush-mounted
Protection class (IP): IP20
Height: 72.0 mm
Width: 72.0 mm
Depth: 46.0 mm
Heating: yes
Number of heating outputs: 1.0
With display: yes
Operation: button
Color: black
Version: On/Off
Connection: three-/four-wire
With receiver: no
External sensor: yes
Thermal feedback: without
Control characteristics: other
Difference value: 1.0 K
Difference adjustable: no
Temperature readable: yes
With noise level display: no
Sensor design: Resistance sensor
With drinking water circuit: no
Max. voltage of the contacts: 230.0 V
Max. Contact load: 16.0 A
Protection class (NEMA): 1
Explosion-proof: no
Diameter: 57.0 mm
Class of the temperature controller: IV
Power consumption in standby mode (solstandby): 1.0 W

Characteristics

OperationButton
Class of temperature controllerIV
Sensor/sensor designResistance sensor
Temperature can be readYes
ManufacturerMERTEN
HANMEG5776-0000
GTIN4042811184681
VersionOn off
Width72.0 mm
Diameter57.0 mm
Explosion-proofNo
ColorBlack
Height72.0 mm
With displayYes
Mounting typeFlush-mounted
IP protection)IP20
Protection class (NEMA)1
Depth46.0 mm
MERTEN MEG5776-0000 Universal temperature controller insert with touch display
MERTEN MEG5776-0000 Universal temperature controller insert with touch display
€164.91
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart