RJ45 connection unit C6, Amodule in flange housing according to ISO/IEC 24702 and IEC 61076-3-106 Var. 6GHMT Cat.6, A re-embedded PVP validatedCat.6, A component testing according to ISO/IEC 11801 Ed. 2.2: 2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008) , GHMT validated Compliance with Class E, A according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09 tested: component up to 600 MHz, link up to 800 MHz, suitable for 10 GBit Ethernet (IEEE 802.3an), remote powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT, easy-to-install connection of data cables AWG 24/1 - 22/1 (single-wire) and AWG 26/7 to 22/7 (multi-wire) on IDC insulation displacement terminals, intelligent cable management in the charging piece, also suitable for heavily twisted cables, marking of the wire assignment T568A and T568B directly on the charging piece, meets protection class IP67 when plugged in, connector face in accordance with IEC 61076-3-106 (variant 6), large-area 360° shield contact, connection of commercially available RJ45 plugs possible (no IP protection), installation without special tools, strain relief via snap-in clip directly on the charging piece of the module, color: light gray RAL 7035
| Property | Value |
| Suitable for number of sockets/couplings: | 1 |
| Category: | 6A (IEC) |
| Connection type: | Insulation displacement terminal IDC |
| Sockets shielded: | yes |
| Housing shielded: | no |
| With text field: | no |
| Separate cable strain relief: | yes |
| Outlet direction: | straight |
| Surface-mounted: | yes |
| With dust protection: | yes |
| Protection class (IP): | IP67 |
| Ambient temperature: | -40 to 70 |
| Mechanical coding: | no |
| Color coding: | no |
| Flush-mounted/built-in: | yes |
| Duct installation: | no |
| Floor tank/underground installation: | no |
| Mounting type: | screws |
| Connector type: | RJ45 8 (8) |
| Connector housing: | IEC 61076-3-106 Var. 6 |
| Connector housing material: | Plastic |
| With sockets/couplings: | yes |
