Device duct base, double-track symmetrical, with loops and rear fastening holes for flexible mounting on the wall or wall bracket, with two equally sized cable runs separated by means of a subsequently mountable, self-contacting aluminum separating profile with cable feed-through openings, continuous loops for holding separating profiles in the back section, device installation in the cable runs with a snap-in device box for installation programs with 80 mm cover frame and 60 mm fastening track, device installation without perforated panels, including 6 GKF 78 cable retaining clips each with a delivery length of 2 m, for potential equalization two joint connectors GSVA... per joint, please order separately.certified! When installing, ensure that the loop openings face upwards. To ensure that the cover sits firmly, the GKF... cable retaining clips must be inserted into the duct base at intervals of 0.6 m - 0.7 m. Dimensions (approx. dimensions) Height H x Depth D : 220 x 70 mm Lid openings : 78 mm and 78 mm Pitch of the cable runs : 110 mm and 110 mm Three-row horizontal back holes : 7 x 33 mm Center hole spacing : 62.5 mm Row spacing : 48 mm and 106 mm Loop spacing Grid dimension : 250 mm Separating profile Cable feed-through opening : 30 mm x 65 mm Center spacing : 500 mm Delivery length L : 2000 mm Total usable cross-section : 12736 mm² Usable cross-section upper cable run : 6452 mm² Usable cross-section lower cable run : 6284 mm² Material : Steel, strip galvanized in accordance with DIN EN 10346
