Device duct base, single-section symmetrical, with loops and rear fastening holes for flexible mounting on the wall or wall bracket, continuous loops for holding separating profiles in the back section, visible surfaces electrostatically powder-coated in RAL color according to the manufacturer's catalog, device mounting in the cable run with snap-in device box for installation programs with 80 mm cover frame and 60 mm fastening track, device installation without perforated panels, including 3 cable retaining clips GKF 78 each with a delivery length of 2 m, for potential equalization two joint connectors GSVA... per joint, please order separately.certified! When mounting, ensure that the loop openings face upwards. To ensure that the cover sits firmly, the cable retaining clips GKF... must be inserted into the duct base at intervals of 0.6 m - 0.7 m. Dimensions (approx. dimensions) Height H x Depth D: 133 x 90 mm Lid opening: 78 mm Two-row horizontal back holes: 7 x 33 mm Center hole spacing: 62.5 mm Row spacing: 75 mm Vertical back holes: 7 x 33 mm Center hole spacing: 500 mm Loop spacing Grid dimension: 250 mm Delivery length L: 2000 mm Usable cross-section: 10722 mm² Color: traffic white RAL: 9016 (similar) Material: Steel, strip galvanized according to DIN EN 10346
