Grid cable tray suspension bracket, C-bracket, for central ceiling suspension of the grid cable tray using an M 6 threaded rod. Double function of the central suspension by rotation around the vertical axis, can be used for grid cable trays with one or two longitudinal floor wires. To prevent the cable tray from being pried open, turn the bracket using a screwdriver. The load-bearing capacity information only applies if the cable tray is sufficiently anchored to the supporting surface. Use for: Mesh cable trays with a wire diameter of 3.9 - 5 mm and a longitudinal wire spacing of 50 mm between the bottom and the wire MTC 30.050 MTC 54.050 with one longitudinal wire MTC 30.100 MTC 54.100 MTCG 50.100 GR 60.100 GRS 60.100 GRC 60.100 GRL 60.090 with two longitudinal wires Dimensions (approx. dimensions) Bracket length L1 (external dimension): 101 mm Bracket length L2 (external dimension): 123 mm Fastening slot in the upper and lower bracket: 7 x 25 mm Height H (external dimension): 135 mm Width B: 24 mm Load capacity F at L/2: 0.2 kN Material: Stainless steel, material no. 1.4301, 1.4303
