STRUT wall bracket, medium-heavy design, C-profile perforated, can be used horizontally rotated by 180° for fitting on both sides, for wall and hanging post mounting, please order the required fastening accessories for mesh trays, cable trays/ladders and wide-span cable trays/ladders separately. The load-bearing capacity information only applies if the trays are sufficiently anchored to the supporting surface or if they are mounted on hanging posts in accordance with regulations. Can be used for: Hanging support STRUT HKC 96ZD/... Dimensions (approx. dimensions) Support height H: 88 mm Width B: 45 mm Support length L: 444 mm C-profile: 41 x 41 mm Slot width: 22 mm Fastening holes on perforated side: 9 x 18 mm and 13 x 30 mm Hole spacing: 50 mm Load capacity F at L/2: 2.8 kN tested in the system Load capacity F1 at L/2 with support plate SBHKC 96: 4.5 kN Boom material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
