Suspended support, U-profile with welded head plate, HUF 50/... system, for brackets for single- and double-sided installation, both-sided arrangement of the brackets horizontally at the same height possible using spacer UD 24. For static reasons and to enable the protective cap to be fitted without problems, the bracket must be mounted at a distance of x=50 mm (bottom edge of the bracket to the end of the suspended support), above the end of the suspended support. Please observe additional regulations for use in functional maintenance! Attention: Limited space for cable tray fitting (length of the suspended support minus height of the bracket)!certified! for boom: KTUL... KTUM... for double boom: KTDL... for central suspension: ZKU... 400 mm length for boom: KTUG... 400 mm length (functional retention) for boom: KTU... 400 mm length in conjunction with console adapter KAWG 12 (functional retention) Dimensions (approx. dimensions) Head plate L x W xt: 140 x 40 x 5 mm Fastening holes: 13 x 20 mm center distance: 100 mm U-profile: 50 x 22 x 2 mm Profile holes, single row: 12 x 30 mm center distance: 50 mm Total length L: 201 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
