GRP cable tray, pressed, with unperforated side rails, with molded connector and eleven-row fastening holes in the base, mechanical strength in accordance with IEC 61537, please order appropriate fastening accessories separately, halogen-free. An expansion distance of 8 mm must be taken into account. Due to the expansion of the material, the following must be observed during assembly: - The cable tray should not be screwed close to or at the joint. - When screwing the cable tray onto the brackets, a through hole of Ø 9 mm for the FKM 6X20 E4 screws must always be made in the tray. Article also available in ...AC (resin mixture with acrylic resin). Dimensions (approx. dimensions) H x W: 50 x 300 mm Material thickness t: 3 mm Bottom perforation: 9 x 20 mm Row spacing: 25 mm bottom hole spacing Grid dimension: 313 mm Load-bearing capacity F at a support spacing of 1.5 m: 0.3 kN/m Delivery length: 3000 mm Usable cross-section: 12496 mm² Material: UP-GF (glass fiber reinforced polyester) Color: pebble gray RAL: 7032 (similar)
