Universal mounting plate for mesh cable trays, without a sight glass, for floor mounting in mesh cable trays with at least two longitudinal wires with a center distance of 50 mm for clamp installations B(K)..., divider and cable tie fastenings, for side mounting on mesh cable trays with at least two lateral longitudinal wires with a center distance of 25 mm for the installation of distribution and junction boxes as well as cable glands. To prevent prying, the tab can be folded over using a screwdriver. Use for: Floor mounting of mesh cable trays MTC..., MTS..., GR..., GRS... and GRC... from a width of 100 mm Side mounting of mesh cable trays MTC 54..., MTC 105..., MTS..., MTCG 50.100, GR 60..., GRS 60... and GRC 60... Dimensions (approx. dimensions) H x W x L : 94 x 10 x 104 mm for wire Ø : 3.9 - 6 mm Floor mounting Central longitudinal wire spacing : 50 mm Side mounting Central longitudinal wire spacing : 25 mm Central vertical elongated hole : 7 x 23 mm Cable gland holes : Ø 20.5 mm and Ø 25.5 mm Cable tie/distribution and junction box holes : 7 x 10.5 mm Clamp outlet : 16 x 89 mm Material: Steel, strip galvanized according to DIN EN 10346
