Screw anchor with countersunk head and Torx drive T20. For outdoor use, we recommend screw anchors made of stainless steel! Application: The number and arrangement of the screw anchors must be taken from the implementation plan or the static proof and must be observed. Installation and assembly in accordance with the European Technical Assessment ETA-15/0784 or assembly instructions in cracked and non-cracked concrete C20/25 to C50/60. The entire approval certificate ETA-15/0784 must be observed when dimensioning. A fire protection report is available for KS sand-lime brick, KSL perforated sand-lime brick and MZ solid brick. Use in dry interior rooms. Set the screw anchor with a tangential impact wrench or by hand. Use for: screw spacing clamps SAS..., pipe and cable spacing clamps 85... G Technical details: 5 mm Length L: 40 mm Head: 7.8 mm Nominal bore: 4 mm Clamping range t fix: 5 mm Recommended torque: 8 Nm Torx drive: T20 Material: Steel, galvanized according to DIN EN ISO 2081/4042, blue passivated Approval no.: ETA-15/0784
