Turn latch for subsequent or additional installation in wide span cable tray/ladder covers, including galvanized flat head screw with slot FL 6X12-S DIN 603 and galvanized lock nut SMS 6 DIN EN ISO 10511. Use outdoors, due to external influences such as wind loads, is only possible with additional security (self-tapping screws, steel band, etc.). When fastening, ensure that a minimum distance of 50 mm is maintained from the beginning/end of the cover. Furthermore, ensure that the screw head slot is installed flush with the fastening tab of the turn latch plate. This ensures that it is possible to later check that all existing turn latches on the cover are properly closed (position of the screw head slot). Use for: Wide span cable trays/ladder covers WDV... Wide span shaped piece covers WTARDV ... WBRDV ... WTRDV ... Delivery: unassembled and loose Material of latch: Steel, strip galvanized in accordance with DIN EN 10346
