Turn latch, for subsequent or additional installation in wide span cable tray/ladder covers, including truss head screw with slot FL 6X12-S E3 DIN 603, washer US M8 E3 DIN EN ISO 7089 and lock nut SMS 6 E3 DIN EN ISO 10511, material no. 1.4301. Use outdoors, due to external influences such as wind loads, is only possible with additional security (self-tapping screws, steel band, etc.). When fastening, ensure that a minimum distance of 50 mm is maintained from the beginning/end of the cover. Furthermore, ensure that the screw head slot is installed flush with the fastening tab of the turn latch plate. This ensures that it is possible to later check that all existing turn latches on the cover are properly closed (position of the screw head slot). Use for: wide-span cable trays/ladder covers WDV... wide-span shaped piece covers WTARDV ... WBRDV ... WTRDV ... Delivery: unassembled and loose Material of latch: steel, hot-dip galvanized in accordance with DIN EN ISO 1461
