Photoelectric sensor, M18 axial, plastic body, infrared LED, BGS, 200mm, PNP, 2m cable
Property | Value |
Rated switching distance: | 4000 mm |
Max. switching distance: | 5000 mm |
Min. reflector distance: | 100 mm |
Max. Output current: | 100 mA |
Rated control supply voltage Us at DC: | 10 to 30 V |
Button function: | light/dark switching |
Protection class (IP): | IP67 |
Length of sensor: | 45 mm |
Diameter of sensor: | 18 mm |
Reaction time: | 0.5 ms |
Switching frequency: | 1000 Hz |
Type of voltage: | DC |
Material of the housing: | Plastic |
With communication interface SSI: | no |
With communication interface AS-Interface: | no |
With time function: | no |
With communication interface DeviceNet: | no |
Execution of the switching function: | programmable/configurable |
With communication interface INTERBUS: | no |
With analog communication interface: | no |
With Ethernet communication interface: | no |
Analog output 4 mA ... 20 mA: | no |
With other analog output: | no |
With PROFIBUS communication interface: | no |
Reflector included in delivery: | no |
Suitable for safety functions: | no |
Analog output 0 mA ... 20 mA: | no |
Analog output -10 V ... +10 V: | no |
With communication interface SSD: | no |
With communication interface CANOpen: | no |
With communication interface RS-485: | no |
Analog output 0 V ... 10 V: | no |
Light type: | Red light polarized |
Material of the optical surface: | Plastic |
With communication interface RS-422: | no |
Setting method: | other |
With communication interface RS-232: | no |
Number of semiconductor outputs with signaling function: | 1 |
Design of the electrical connection: | M12 connector |
Design of the switching output: | PNP |
Explosion protection category for Gas: | without |
Explosion protection category for dust: | without |
Housing design: | Cylinder, thread |
Ambient temperature: | -25 to 55 °C |
With monitoring function for downstream devices: | no |
Pre-failure warning: | no |
Sensor wavelength: | 624 nm |
With restart lock: | no |