Catalog

Pepperl & Fuchs 267075-100256 OBD800-R103-2EP-IO Diffuse reflection sensor

In stock
SKU: 618117
€104.18
Into a basketIn the basketGo

Overview

Sensing range: 2 ... 800 mm, light transmitter: LED, light type: red, alternating light, signal output: 2 push-pull outputs, short-circuit proof, reverse polarity protected, overvoltage proof, interface type: IO-Link (via C = pin 4), circuit type: the circuit type of the sensor is switchable. The delivery state is: C/Q - BK: NPN normally open / light switching, PNP normally closed / dark switching, IO-Link /Q - WH: NPN normally closed / dark switching, PNP normally open / light switching, connection: 2 m fixed cable, operating voltage: 10 ... 30 V DC, ambient temperature: -40 ... 60 °C (-40 ... 140 °F), fixed cable -25 ... 60 °C (-13 ... 140 °F), flexible cable not suitable for drag chains

Property Value
Protection class (IP): IP67
Length of the sensor: 26,700,000 mm
Width of the sensor: 15.000000 mm
Height of the sensor: 36.500000 mm
With analog communication interface: no
With RS-422 communication interface: no
Reflector included in delivery: no
Analog output -10 V ... +10 V: no
With Ethernet communication interface: no
Analog output 0 mA ... 20 mA: no
With communication interface SSD: no
With communication interface SSI: no
Analog output 0 V ... 10 V: no
With communication interface RS-232: no
With communication interface AS-Interface: no
Analog output 4 mA ... 20 mA: no
With communication interface PROFIBUS: no
With communication interface RS-485: no
With communication interface DeviceNet: no
With communication interface INTERBUS: no
With communication interface CANOpen: no
Design of the electrical connection: Cable
Design of the switching output: PNP/NPN
Design of the switching function: antivalent
Housing design: Cuboid
Light type: Red light unpolarized
Switching frequency: 1000,000,000 Hz
Voltage type: DC
Pre-failure warning: no
Material of the optical surface: Plastic
Material of the housing: Plastic
With Time function: no

Characteristics

Design of the switching functionAntivalent
Switching frequency1000.000000 Hz
HABOBD800-R103-2EP-IO
ManufacturerPepperl & Fuchs
HAN267075-100256
GTIN4050143045518
Design of the switching outputPNP/NPN
Design of the electrical connectionCable
Width of the sensor15,000,000 mm
Housing designCuboid
Height of the sensor36.500000 mm
Length of the sensor26,700,000 mm
IP protection)IP67
Voltage typeDC
Housing materialPlastic
Pepperl & Fuchs 267075-100256 OBD800-R103-2EP-IO Diffuse reflection sensor
Pepperl & Fuchs 267075-100256 OBD800-R103-2EP-IO Diffuse reflection sensor
€104.18
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart