Home
Installation
PhoenixContact
Phoenix Contact 2862149 IB IL AI 2-HART-PAC Inline terminal

Phoenix Contact 2862149 IB IL AI 2-HART-PAC Inline terminal

In stock

SKU: 567133

Price on request

€652.76

€0

Overview

Two differential signal inputs for current sensors. Connection of the sensors using 2-wire technology (active and passive sensors). Current ranges: 4mA ... 20mA, 0mA ... 25mA. Presetting of both channels to the measuring range 4mA ... 20mA and the IBIL format. Transmission of the HART protocol with PCP. Display of the measured values in three different formats possible. Resolution depends on the display format and the measuring range. Measured value acquisition with 16-bit resolution. Point-to-point and multidrop connections possible. Polling and burst operating modes. FDT/DTM support.

Property	Value
Protection class (IP):	IP20
Type of supply voltage:	DC
Height:	136.04 mm
Width:	48.6 mm
Depth:	70.51 mm
Input, current:	yes
Input, voltage:	no
Output, current:	no
Output, voltage:	no
Supports protocol for SafetyBUS p:	no
Supports protocol for DeviceNet:	no
Supports protocol for KNX:	no
Supply voltage for DC:	19.2 to 30 V
Supports protocol for MODBUS:	no
Supports protocol for PROFIsafe:	no
Wall/direct mounting possible:	no
Supports protocol for EtherNet/IP:	no
Front installation possible:	no
Supports protocol for TCP/IP:	no
Design of the electrical connection:	other
Rack mounting possible:	no
Supports protocol for SUCONET:	no
Resolution of the analog inputs:	16 bit
Supports protocol for INTERBUS:	no
Supports protocol for DeviceNet Safety:	no
Supports protocol for PROFIBUS:	no
Suitable for safety functions:	no
Supports protocol for CAN:	no
Supports protocol for SERCOS:	no
IO-Link Master:	no
Supports protocol for ASI:	no
Supports protocol for Foundation Fieldbus:	no
Supports protocol for AS-Interface Safety at Work:	no
Supports protocol for PROFINET IO:	no
Supports protocol for PROFINET CBA:	no
Supports protocol for Data-Highway:	no
Supports protocol for other bus systems:	yes
Input, resistance:	no
Input, resistance thermometer:	no
Input, thermocouple:	no
Input signal configurable:	yes
Output signal configurable:	no
Mounting rail possible:	yes
Fieldbus connection possible via separate bus coupler:	yes
Supports protocol for LON:	no
Supports protocol for INTERBUS-Safety:	no
System component:	yes
Number of other HW interfaces:	2
Associated equipment (Ex ia):	no
Associated equipment (Ex ib):	no
Analog inputs configurable:	yes
Number of analog inputs:	2
SIL according to IEC 61508:	without
Analog outputs configurable:	no