Conductor terminals for mounting on DIN rails, e.g. for installation distributors and meter boxes in accordance with 0603. For fastening on DIN rail 3.5 mm in accordance with EN 50022 / EN 60715. Clamping body: tinned brass. Clamping screws: galvanized steel. Insulating housing: plastic (polyamide), impact-resistant, flame-retardant, halogen-free. Quick fastening: sheet steel, galvanized or nickel-plated. Standards / regulations: Installation distributors and meter boxes AC 400V. Main line branch terminals VDE0603-2. Connecting material for low-voltage circuits for household and similar purposes 0613 Part 1 / EN 60998-1. Line connection: Main line: 1.5 - 25 mm² rigid / multi-strand, 2.5 Nm. 1.5 - 16 mm² fine-stranded - wire end ferrule 2.5 Nm. Branch line: 1.5 - 16 mm² rigid/multi-stranded, 2 Nm. .1.5 - 10 mm² fine-stranded - wire end ferrule 2 Nm. Stripping length: 16 mm. Socket terminal with 2 screws per terminal point. Screws with combination Phillips Pozidriv Z2. Insulation voltage: 1000 V AC / DC for: Overvoltage category III (Uimp = 8 kV, fixed installation), pollution degree 2 (e.g. distribution board installation). PHALK25224GR: 4-pole and PHALK25225GR: 5-pole. Can be connected in series or extended with terminals type PHLAK. Suitable for Cu-Al conductors. PHALK25224GR: Inputs max. 25 mm²: 4x2, outputs max. 16 mm²: 4x2. PHALK25225GR: Inputs max. 25 mm²: 5x2, outputs max. 16 mm²: 5x2
