The DuoFern sun sensor is a radio sensor for visibility and sun protection control and enables brightness-dependent control of up to 5 DuoFern devices. In combination with the HomePilot® it can also be used as a 2-in-1 sensor as a vibration sensor. It also detects vibrations, e.g. in the event of an attempted break-in. The sensor is attached to the window pane with the suction cup on the back and has a modern, compact and slim design (35 x 74 x 21.4 mm). It has On/Off & Off/Stop control buttons on the sensor, which enable manual operation of the registered DuoFern devices. The integrated position sensor automatically detects the installation position (horizontal or vertical) and automatically assigns the control buttons and the LED scale. A multi-colored menu LED shows the menu items Sun, Vibration and DuoFern one after the other. Here you can set the appropriate brightness and vibration threshold using the practical LED scale. When a selectable and individually set limit value is overwritten, the sensor sends a radio command to all registered receivers. For example, the shutters can be lowered to the set position of the sun.
